Shenzhen Huaxu Machinery Co., Ltd
Waste Stripping Machines Maintenance items
It is recommended to check the Qingji maintenance tools every two months or so to check whether the bearing gear, chain for example ,5# 5 rows of small tooth and transmission parts are lubricatedClean well and then inject grease into the motor head so that the internal gears of the motor are fully lubricated if the motor During the period of high frequency use of the tools, it is recommended to carry out routine check of the stripping machine tools for qualification every two weeks.
According to the different use of regular cleaning pneumatic motor blade cleaning method is; Loosen the intake pipe and inject through the air inlet.
A small amount of less viscous sliding agent is connected to the trachea for 30 seconds, then loosen the trachea, pour out the HS-800 dirty oil, and then drop a small amount of lubricating oil.
A lubricant such as MD40 can also be infused through the exhaust port to clean.
3if the tool is placed for a long time, it is not required to drop a small amount of lubricating oil from the air inlet and let the tool run for a few seconds before storing.
The inner parts of such a tool will be kept lubricated and rustproof.
